Bending Products and Solutions
- Value Added
- Scrach Prevention
- Time Saving
-
AGRIP A/M -
SGRIP -
Hydraulic 1V Die Holder -
Amada Modular
Tooling System -
AFH
tool -
Set up time reduced using
heavy gauge 1V die -
FEAT AFH Dieholder -
Reversible 1V Die Holder -
Wing Bend -
Light-Weight Hemming
Tool Ⅰ,Ⅱ -
Light-Weight Hemming
Tool Ⅲ -
Super
Multi II -
fine offset -
Qucik Change 2V Die 
Reversible Acute 2V Dies
-
- Accuracy Support
- Long Life
- Deep/Box bending
- Management
EG-AR LS2 Sectionalized Tool
| Description / Specification / Profile | Effective Height |
Edge Angle |
Edge R | Tip Width |
Allow.Ton. | Size | FEL# |
|---|---|---|---|---|---|---|---|
| 206 MT-36 Type (Acute)  HRC54±2 Image below: Tab Profile: 5mm/10mm |
150 | 30° | 0.2 ※1 (for 86°R0.2) |
6mm | 500kN/m | Sect. | 206265E |
| 0.6 ※2 (for 86°R0.6) |
206665E | ||||||
| 0.2 ※3 (for 90°R0.2) |
206205E | ||||||
| 0.6 ※4 (for 90°R0.6) |
206605E |
※a One of 15mm punches can be changed to 10mm tab profile or 5mm tab profile.
※About Sectionalized Length
※1. Select this profile when using together with 86°R0.2 punches.
※2. Select this profile when using together with 86°R0.6 punches.
※3. Select this profile when using together with 90°R0.2 punches.
※4. Select this profile when using together with 90°R0.6 punches.
