Bending Products and Solutions
- Value Added
- Scrach Prevention
- Time Saving
-
AGRIP A/M -
SGRIP -
Hydraulic 1V Die Holder -
Amada Modular
Tooling System -
AFH
tool -
Set up time reduced using
heavy gauge 1V die -
FEAT AFH Dieholder -
Reversible 1V Die Holder -
Wing Bend -
Light-Weight Hemming
Tool Ⅰ,Ⅱ -
Light-Weight Hemming
Tool Ⅲ -
Super
Multi II -
fine offset -
Qucik Change 2V Die 
Reversible Acute 2V Dies
-
- Accuracy Support
- Long Life
- Deep/Box bending
- Management
EG-AR LS2 Sectionalized Tool
| Description / Specification / Profile | Effective Height |
ＶWidth | V Angle |
Shoulder R |
W Width |
Allow.Ton. | Size | FEL# |
|---|---|---|---|---|---|---|---|---|
V=5  HRC54±2 Image below: Tab Profile: 5mm/10mm |
150 | 5 | 86° | 0.4 | 8 | 500kN/m | Sect. | 887565 |
| 1.0 | 897565 | |||||||
| 90° | 0.4 | 887505 | ||||||
| 1.0 | 897505 | |||||||
| 0.4 | 11 | 1000kN/m | 887515 | |||||
| 1.0 | 897515 | |||||||
| 30° | 1.0
※1 (for 86°R0.2) |
15 | 190kN/m | 887535 | ||||
| 1.0
※2 (for 86°R0.6) |
897535 | |||||||
| 1.0
※3 (for 90°R0.2) |
887575 | |||||||
| 1.0
※4 (for 90°R0.6) |
897575 |
※a One of 15mm punches can be changed to 10mm tab profile or 5mm tab profile.
※About Sectionalized Length
Note） Please select 30°dies in accordance with punch type. Height varies by punch type.
※1 Select this die when using together with 86°R0.2 punches and 30°R0.2 Acute punches.
※2 Select this die when using together with 86°R0.6 punches and 30°R0.6 Acute punches.
※3 Select this die when using together with 90°R0.2 punches and 30°R0.2 Acute punches.
※4 Select this die when using together with 90°R0.6 punches and 30°R0.6 Aucte punches.
