Bending Products and Solutions
- Value Added
- Scrach Prevention
- Time Saving
-
AGRIP A/M -
SGRIP -
Hydraulic 1V Die Holder -
Amada Modular
Tooling System -
AFH
tool -
Set up time reduced using
heavy gauge 1V die -
FEAT AFH Dieholder -
Reversible 1V Die Holder -
Wing Bend -
Light-Weight Hemming
Tool Ⅰ,Ⅱ -
Light-Weight Hemming
Tool Ⅲ -
Super
Multi II -
fine offset -
Qucik Change 2V Die 
Reversible Acute 2V Dies
-
- Accuracy Support
- Long Life
- Deep/Box bending
- Management
Modular Tool Punch
| Profile/Spec | Angle | Edge R | Size | H=90 | H=120 |
|---|---|---|---|---|---|
| Cat.No. | Cat.No. | ||||
| Gooseneck Punch MT-40  HRC54±2  |
88° | R0.2 | 415mm (without SQ) | 40280E | 40282E |
| 415mm (with SQ) | 40280A | 40282A | |||
| 300mm | 40280D | 40282D | |||
| 200mm | 40280C | 40282C | |||
| D Sect.Set | 40280F | 40282F | |||
| Ear Set | 40280G | 40282G | |||
| R0.6 | 415mm (without SQ) | 40680E | 40682E | ||
| 415mm (with SQ) | 40680A | 40682A | |||
| 300mm | 40680D | 40682D | |||
| 200mm | 40680C | 40682C | |||
| D Sect.Set | 40680F | 40682F | |||
| Ear Set | 40680G | 40682G | |||
| 90° | R0.2 | 415mm (without SQ) | 40200E | 40202E | |
| 415mm (with SQ) | 40200A | 40202A | |||
| 300mm | 40200D | 40202D | |||
| 200mm | 40200C | 40202C | |||
| D Sect.Set | 40200F | 40202F | |||
| Ear Set | 40200G | 40202G | |||
| R0.6 | 415mm (without SQ) | 40600E | 40602E | ||
| 415mm (with SQ) | 40600A | 40602A | |||
| 300mm | 40600D | 40602D | |||
| 200mm | 40600C | 40602C | |||
| D Sect.Set | 40600F | 40602F | |||
| Ear Set | 40600G | 40602G |
※Right/Left Ear Size:100(Left), 100(Right) Total 200mm
※Area in blue is recommended.
※As above items, Non-SQ type (fixture pin style) is recommended because the weight of 415mm tooling is more than 12.5kg.
| Weight (415mm) | |
| H90 | 9.6kg |
| H120 | 13.8kg |